Arlight's NAVE and PRIME series motion and illumination sensors

This equipment is compatible with all lights, fixtures, spotlights, and other 230V lighting sources. 

The sensors allow the consumers to reduce energy costs, organize a convenient and safe lighting system, and adjust the switching according to a specific scenario — for example, make it activate in the dark. The sensors used in the video surveillance system monitor for emergency situations.

NAVE Series

Modern design and excellent features. The novelties include a miniature infrared motion sensor NAVE-PIR-BUILT-R43-150W, combined with a lighting sensor. The sensor can be built into the ceiling (height 2.2–4 m) and has a working distance of up to 6 m. The sensor has a wide detection angle of 360° and a time delay of 10 seconds to 7 minutes.

Another model of the NAVE-PIR-SURFACE-300W infrared sensor has a high degree of dust and moisture protection IP65 and can be used with outdoor spotlights. It can be installed right on the wall (height 1.8–2.5 m). It has a wide response zone of up to 12 m in landscape plane with a detection angle of 180°. Perfect solution for comfortable and cost-effective outdoor lighting.

PRIME Series

PRIME series offers affordable equipment for convenient 24/7 lighting management.

• Microwave sensors

The PRIME-MW-SURFACE-R94-300W motion sensor, combined with a light sensor, can be triggered through thin walls and doors. Placement height: 1.5–3.5 m; detection angle: 360°. The sensor works at a distance of 1 to 10 m. Shutdown time setting: 8 seconds to 12 minutes.

The compact model PRIME-MW-SURFACE-S90x41-300W can be built into fixtures made of any material except metal, since the radio signal cannot pass through metal.

The sensor is easily installed on the walls or the ceiling, suitable for any premises (residential buildings, offices, shopping malls). At an installation height of 1.5–3.5 m, it has a 360° circular detection angle.

• Infrared sensors

Three new models of infrared sensors are available: PRIME-PIR-SURFACE-R76-200W, PRIME-PIR-BUILT-200W and PRIME-PIR-BUILT-R53-200W. Every modification has a specific triggering zone that you should consider. Each model has a built-in light 3–2000 lux sensor. The maximum load for LED and fluorescent lamps is 200 W.

The PRIME-PIR-SURFACE-R76-200W sensor with a 360° landscape detection angle can be mounted on the ceiling. The PRIME-PIR-BUILT-200W sensor with a detection angle of 160° is installed at 1–1.8 m and operates at a distance of up to 9 m. Special design and connection method make it easy to install in place of a standard wall switch. The front panel has a control mode setting switch for turning the light on/off in normal mode or when motion is detected.

Engineering design of sensor PRIME-PIR-BUILT-R53-200W is optimized for installation in tension or suspended ceilings. Due to the fixed range of up to 6 m and a wide detection angle of 360° in landscape mode, the sensor is suitable for rooms of any size.

The wide range of applications makes infrared sensors an all-purpose solution.

• HIGHBAY warehouse and spotlight sensors

These sensors have been developed specially for industrial facilities to optimize energy costs and maintain a comfortable illumination level at any time of day and night.

The sensors with flexible settings can be used to adjust the lighting when employees or equipment are present briefly. They can be installed by overhead mounting anywhere at the height of 4 to 15 m. A built-in light sensor helps to set the devices to only be triggered in the dark.

PRIME-MW-HIGHBAY-R71-1000W is an active 360° microwave motion sensor. It can be used with lamps, spotlights, and fixtures. It works within a radius of 4 to 10 m and automatically turns off the light after 5 seconds to 30 minutes once there is no movement in the range of action.

NAVE-MW-HIGHBAY-R71-500W microwave motion sensor is additionally equipped with a dimming-resembling standby light function. In stand-by mode, the brightness is set to 10, 20, 30 and 50% with time intervals of 0, 10 seconds, 1, 5, 10, 30, 60 minutes and beyond with no restrictions. This function is only available in 0–10 V dimmers. Warehouse sensors can be installed both on the wall and on the light fixture (spotlight) with special fasteners, also found in the range.